[. . . ] , messages with more priority marks are placed before those with fewer priority marks. Alarm function You can start playing back a desired message with an alarm on a desired date and time (see page 26). You can use this function to remind you of the time of the meeting, etc. Index function You can add an index at the desired point during recording or playback to divide a message into two (see page 22). [. . . ] 1 Press ERASE while playing back the message you want to erase or press ERASE for more than 1 second during stop mode. A beep will sound and the message number and "ERASE" will flash while the first and last 5 seconds of the message is played back 10 times. Renumbering the Messages according to their Priority -- Priority Marks Usually the recorded messages are lined up in the order of recording. By adding priority marks ( ) to important messages, you can renumber the messages in the order of their priority. You can add up to three priority marks with " " being the most important. Every time you press PRIORITY, the display changes in the following order: n n n no mark. How the messages are arranged The messages with priority marks are rearranged according to the number of the marks. Messages with no priority marks are placed after those with priority marks. During stop mode, messages are rearranged every time a priority mark is added. The messages with the same number of priority marks are arranged in the order of recording. When there are 3 messages in a file, they are arranged as follows: While messages are being rearranged, "--" is displayed in the message number display. If you do not press (pPLAY/STOP while the first and last 5 seconds of the message are played back, the display will return to the REMAIN display. Press FILE during playback to select the file you want to move the message to. The file and "MOVE" will flash and the first and last 5 seconds of the message will be played back 10 times. When you move a message to another file, the one in the previous file will be deleted. If you do not press (pPLAY/STOP while the first and last 5 seconds of the message are played back, the display will return to the REMAIN display. You can divide a message by adding an index during recording or playback. By dividing a message, you can easily find the point you want to play back when you make a long recording such as of a meeting. The new message number flashes three times at the point you pressed INDEX. The message will be divided in two messages; however, the messages will be recorded without a break. While playing back a message, press INDEX at the point you want to mark. The message is divided in two and the new message number flashes three times. [. . . ] , accidentally rubbed or scratched the unit during recording so that noise was recorded. The unit was placed near an AC power source, a fluorescent lamp or a mobile phone during recording or playback. Playback speed is too · You have not set the clock (see page 8). The date of recording will not be displayed if you recorded the message when the clock was on the REC DATE not set. [. . . ]